|
January~07
Ament have a separate stainless steel fabrication division, here,
they are in the final stages of manufacturing the stainless steel rear hand-rails.
They are in the last process,
the final polishing of welded joints before fixing to JENAL.
They are made in 2 parts, port and starboard assemblies (portside in foreground),
meeting in the middle by the aft flag-pole area.
JENAL's aft most point also has a socket in deck area for the
boarding ramp, used when mooring 'Mediterranean-style' where the landing ramp
is used
lengthwise from the rear to land. The bow is normally either
anchored-off or tied to a buoy.
|
 |
