|
November~06 The top
left picture shows the portside opening floor panel outside the wheelhouse. It
is a lockable panel and it houses all the fluid (water, diesel, etc)
fillers, it also houses the safety kill cable pulls for the engines and
the engine/electrics room air vent shut-offs. See bottom right.
Top right is the underside of the above,
where all the filler pipes connect to their respective installed lines.
Bottom left illustrates one of the three
stainless steel extractor outlets on JENAL, this one is the
bathroom vent where an electric extractor fan will eventually attach.
Bottom right shows one of the internal engine
vents, this will eventually have an added 'swan-neck' extension to bring
the outlet just below the gunnel. The piece of string attached
to one of the engine room vent flaps is an example of
Aments attention to detail, the string enabling them to make the
correct cable pulley run. Upon completion, the string will be replaced by a
purpose-made Bowden
cable.
|
