have come in for further evolution with a digital gear selection
Acumen Electronics and side-stand neutral by-pass relay to allow the
engine to start on the side-stand but not in-gear.
to make an aluminium disc to hold 6 magnets and attached it to
the gearbox duplex chain sprocket. Its reader was mounted on
another piece of alloy and hung from an oil pump stud.
Consequently road speed is now compared to revs via the Sachse
ignition pack. Once the set up procedure is followed, the dash
mounted digital oblong gauge advises the gear selected.
The neutral side-stand
relay override was a straight forward convertion. A simple
automotive accessory relay bridges the side-stand power cable
only when the neutral light is illuminated. This makes for
easier starting of the Benelli, saving having to mount the 900
on the main stand each time to start it.